511685 - 10SP2V2D

1/2 HP Premium package for the collection of sewage, effluent, drainage or seepage water. The redesigned Little Giant Pit+Plus basin features a separate pump and ECM (External Control Module) switch access cover for easy service and installation. The innovative sewage package also incorporates molded-in discharge and vent ports, allowing access to the pump or switch independently without disrupting the plumbing connections - saving time, money and mess.

Item: 511685
Model: 10SP2V2D

Electrical

HP 1/2 hp
Frequency 60 Hz
Phase Single-Phase
Amps - Full Load 11.5 A
Amps - Starting 28 A
Full Load Watts 1270 W
Volts 115 VAC
Cord Length 6.1 m / 20 ft
Pump Power Cord Type SJTW
Pump Power Cord Gauge 16-3
Lead Length 6.1 m / 20 ft
Motor Type Submersible
Continuous Duty Yes
Thermal Overload Protection Yes

Operation

Max Flow Rate - 60 Hz 454.25 Lpm / 27255 Lph / 27.25 m³/h
Shut-Off 7.62 m / 25 ft
Shut Off Height - 60Hz 7.62 m / 25 ft
Max Solid Handling Size 5.08 cm / 2 "
Switch Type ECM
Motor Cooling Oil
Max Fluid Temperature 140°F

Materials of Construction

Pump Base Material Cast Iron
Pump Body Material Cast Iron
Pump Volute Material Cast Iron
Impeller Type Vortex
Impeller Material Nylon
Motor Shaft End - Material 420 Stainless Steel
Fasteners Material Stainless Steel
Top Bearing Material Steel
Top Bearing Type Ball
Seal Material Carbon/Ceramic, Nitrile
Seal Type Carbon/Ceramic/Nitrile

Installation

Discharge Thread FNPT
Discharge Type Threaded - FNPT
Discharge 2 "
Product Weight 30.39 kg / 67 lb
Product Width 60.96 cm / 24 "
Product Height 82.7 cm / 32.56 "
Product Length 60.96 cm / 24 "
Pump Length 26.42 cm / 10.4 "
Product Weight w/ Pack 30.39 kg / 67 lb
Carton Width 66.04 cm / 26 "
Carton Height 88.9 cm / 35 "
Carton Length 66.04 cm / 26 "
Off Level - Range 2" - 4"
On Level - Range 10.25" - 12.25"

Other

Accessories Included Pre-Assembled: 20"x30" Polyethylene Basin with stub out intake, 1-Piece Structural Foam Bolt-on Cover, 2" discharge, 2" vent, with 10SC-CIM Sewage Pump (Item 511435) 115V 1/2HP, piggyback ECM switch and includes finish cover.
Component Pump Part Number 511435
Standard Warranty 36 Months
  Warranty Terms and Conditions Link