620254 – WS52HM
This submersible sewage pump comes in 1/2 hp with 15 Vac 60 Hz Single Phase 30 Foot Cord and 2" discharge. Pump capability is 156 Gallon Per Minute At 5 Foot Rise with 29 Foot Max Height.
| Item: | 620254 |
| Model: | WS52HM |
Ratings |
|
| HP | 1/2 hp |
| Frequency | 60 Hz |
| Phase | Single-Phase |
| Amps - Full Load | 15 A |
| Amps - Starting | 26.9 A |
| Full Load Watts | 1520 W |
| Volts | 115 VAC |
| Cord Length | 30 ft |
| Pump Power Cord Type | SJOW |
| Pump Power Cord Gauge | 14-3 |
| Lead Length | 30 ft |
| Motor Type | Submersible |
| Continuous Duty | Yes |
| Thermal Overload Protection | Yes |
| Maximum Flow Rate - 60Hz | 128 gpm / 7680 gph |
| Minimum Flow Rate - 60Hz | 10 gpm / 600 gph |
| Shut-Off | 29 ft |
| Minimum Head - 60Hz | 5 ft |
| Shut Off Height - 60Hz | 29 ft |
| Stages | 1 |
| Max Solid Handling Size | 2 " |
| Switch Type | Manual |
| Motor Cooling | Oil |
Liquid |
|
| Max Fluid Temperature | 120 °F |
Materials of Construction |
|
| Pump Base Material | Cast Iron |
| Pump Body Material | Cast Iron |
| Pump Volute Material | Cast Iron |
| Impeller Type | Non-Clog |
| Impeller Material | Cast Iron |
| Motor Shaft End - Material | 420 Stainless Steel |
| Intake Screen Material | Cast Iron Epoxi |
| Fasteners Material | Stainless Steel |
| Top Bearing Material | Steel |
| Top Bearing Type | Ball |
| Bottom Bearing Type | Ball Bearing |
| Seal Material | Carbon/Ceramic, Nitrile |
| Seal Type | Carbon/Ceramic/Nitrile |
Installation |
|
| Discharge Thread | FNPT |
| Discharge Type | Threaded - FNPT |
| Discharge | 2 " |
| Product Length | 12.25 " |
| Product Width | 9.38 " |
| Product Height | 15.1 " |
| Pump Length | 12.25 " |
| Product Weight | 58 lb |
| Product Weight w/ Pack | 58 lb |
| Carton Length | 12.25 " |
| Carton Width | 9.75 " |
| Carton Height | 19.5 " |
Other |
|
| Accessories Included | None |
| Electrical Agency Approvals | CSA |
| Standard Warranty | 12 Months |
| Warranty Terms and Conditions Link | |
