509413 9SC-CIM

The 9SC Series submersible sewage pump is specifically engineered to handle the demanding tasks for wastewater and sewage waste transfer with high efficiency and long term dependability. Ideal for use in residential, commercial, industrial, and agricultural applications with light to medium transfer demands such as dewatering, sewage waste, wastewater, and handling where such materials must be moved upward from a collection area to sewer lines, septic lines, or drainage areas. 2-pole motor provides increased speed and yields higher performance at higher heads.

Item: 509413
Model: 9SC-CIM

Ratings

HP 0.4 hp
Frequency 60 Hz
Phase Single-Phase
Amps - Full Load 8 A
Amps - Starting 18.5 A
Full Load Watts 870 W
Volts 115 VAC
Cord Length 20 ft
Pump Power Cord Type SJTW
Pump Power Cord Gauge 18-3
Lead Length 20 ft
Motor Type Submersible
Continuous Duty Yes
Thermal Overload Protection Yes
Maximum Flow Rate - 60Hz 100 gpm / 6000 gph
Minimum Flow Rate - 60Hz 5 gpm / 300 gph
Shut-Off 20 ft
Minimum Head - 60Hz 5 ft
Shut Off Height - 60Hz 20 ft
Stages 1
Max Solid Handling Size 2 "
Switch Type Manual
Motor Cooling Oil

Liquid

Max Fluid Temperature 140 °F

Materials of Construction

Pump Base Material Cast Iron
Pump Body Material Cast Iron
Pump Volute Material Cast Iron
Impeller Type Vortex
Impeller Material Nylon
Motor Shaft End - Material 420 Stainless Steel
Check Valve No
Fasteners Material Stainless Steel
Top Bearing Material Steel
Top Bearing Type Ball
Bottom Bearing Material Steel
Bottom Bearing Type Ball Bearing
Seal Material Carbon/Ceramic, Nitrile
Seal Type Carbon/Ceramic/Nitrile

Installation

Discharge Thread FNPT
Discharge Type Threaded - FNPT
Discharge 2 "
Product Length 10.4 "
Product Width 8.6 "
Product Height 13.6 "
Pump Length 10.4 "
Product Weight 36 lb
Product Weight w/ Pack 38 lb
Carton Length 11.6 "
Carton Width 10.25 "
Carton Height 17.5 "

Other

Accessories Included None
Electrical Agency Approvals CSA
Standard Warranty 12 Months
  Warranty Terms and Conditions Link