620223 - WS100HAM-12-20

Known for its high-performance, the 1 hp effluent pump comes with 230V, 1-phase, 20' cord, automatic tethered float switch operation and 2" discharge. Ideal for effluent wastewater removal, dewatering and water transfer.

Item: 620223
Model: WS100HAM-12-20

Electrical

HP 1 hp
Frequency 60 Hz
Phase Single-Phase
Amps - Full Load 13.6 A
Amps - Starting 46.9 A
Full Load Watts 2660 W
Volts 208 VAC
Cord Length 6.1 m / 20 ft
Pump Power Cord Type SJOW
Pump Power Cord Gauge 14-3
Lead Length 6.1 m / 20 ft
Motor Type Submersible
Continuous Duty Yes
Thermal Overload Protection Yes

Operation

Max Flow Rate - 60 Hz 567.81 Lpm / 34069 Lph / 34.07 m³/h
Shut-Off 27.43 m / 90 ft
Shut Off Height - 60Hz 27.43 m / 90 ft
Max Solid Handling Size 1.91 cm / 0.75 "
Switch Type Piggyback Mechanical Float
Motor Cooling Oil
Max Fluid Temperature 120°F

Materials of Construction

Pump Base Material Cast Iron
Pump Body Material Cast Iron
Pump Volute Material Cast Iron
Impeller Type Non-Clog
Impeller Material Cast Iron
Motor Shaft End - Material Stainless Steel
Intake Screen Material Cast Iron Epoxi
Fasteners Material Stainless Steel
Top Bearing Material Steel
Top Bearing Type Ball
Bottom Bearing Material Steel
Bottom Bearing Type Ball Bearing
Seal Material Carbon/Ceramic, Nitrile
Seal Type Carbon/Ceramic/Nitrile

Installation

Discharge Thread FNPT
Discharge Type Threaded - FNPT
Discharge 2 "
Product Weight 26.76 kg / 59 lb
Product Width 23.83 cm / 9.38 "
Product Height 34.93 cm / 13.75 "
Product Length 31.12 cm / 12.25 "
Pump Length 31.12 cm / 12.25 "
Product Weight w/ Pack 31.62 kg / 69.7 lb
Carton Width 25.4 cm / 10 "
Carton Height 50.8 cm / 20 "
Carton Length 30.48 cm / 12 "
Off Level - Range Adjustable
On Level - Range Adjustable

Other

Accessories Included Piggyback mechanical float comes packaged with the pump (uninstalled).
Electrical Agency Approvals CSA
Standard Warranty 36 Months
  Warranty Terms and Conditions Link