585604 TE-5.5-MD-HC

Developed for the circulation of highly corrosive solutions, the TE-5.5-MD-HC is a leakproof, seal-less magnetic drive designed for in-line, non-submersed use. It is suitable for the movement of highly corrosive solvents, acids, alkalis, and other chemicals and solutions that are compatible with the material that was used to make the pump. The pump has an intake size of 1” FNPT and a discharge size of 3/4” MNPT. It has a 1/3 hp motor. This Little Giant 585604 TE-5.5-MD-HC Chemical Pump can pump up to 32 GPM at 5’ head pressure and up to 6 GPM at 40’ head pressure. This chemical pump can handle fluids with a specific gravity of up to 1.1 and with temperatures of up to 180°F.

Item: 585604
Model: TE-5.5-MD-HC


HP 1/3 hp
Frequency 50/60 Hz
Amps - Full Load 5 A
Full Load Watts 525 W
Volts 230 VAC
Maximum Flow Rate - 60Hz 32 gpm / 1920 gph
Minimum Flow Rate - 60Hz 0.03 gpm / 2 gph
Flow Rate At 1ft 32 gpm / 1920 gph
Shut-Off 40.5 ft
Minimum Head - 60Hz 5 ft
Shut Off Height - 60Hz 40.5 ft
Max PSIG - 60Hz 17.5 PSI
Switch Type Manual


Max Fluid Temperature 200 °F

Materials of Construction

Pump Body Material Plastic
Discharge Head Material Thermoplastic
Impeller Material GF Polypropylene


Discharge Thread MNPT
Discharge Type Threaded - MNPT
Suction Type Threaded - FNPT
Product Length 16.3 "
Product Width 8.81 "
Product Height 8.6 "
Pump Length 16.3 "
Product Weight 33.1 lb
Product Weight w/ Pack 33.6 lb
Carton Length 20.13 "
Carton Width 10.63 "
Carton Height 8.38 "


Standard Warranty 12 Months
  Warranty Terms and Conditions Link