Highly Corrosive Chemical Transfer Pumps

TE-6-MD-HC Series

Highly Corrosive Chemical Transfer Pumps

TE-6-MD-HC Series

The TE-6-MD-HC is designed to transfer highly corrosive acids, alkalis, solvents, brine, plating solutions, sterile solutions, and other highly corrosive chemicals and solutions compatible with the pump's material construction. The pump also utilizes pure carbon bushing in the impeller to enable the pump to run dry for periods up to eight hours.

Features & Benefits

  • 1/2 hp TEFC split phase motor
  • Glass-filled polyphenylene sulfide volute and backplate
  • 1.1 specific gravity
  • Fluoroelastomer (FKM) O-ring
  • Ceramic thrust washers and shaft
  • Run-dry capability up to 8 hours

Overview


The rigorous TE-6-MD-HC is designed to handle highly corrosive fluids with superior efficiency. This chemical transfer pump is capable of producing up to 38GPM at 22.1 PSI maximum pressure. This pump utilizes a glass-reinforced polypropylene housing that is designed with a 1/2 hp thermally-enclosed, fan-cooled split-phase motor, Fluoroelastomer (FKM), and 1" FNPT fittings.

Specifications


Capacity 38 gpm @ 1'
Shut Off 51' (15.5 m)
Max. Liquid Temp. 180 °F (82.2 °C)
Discharge 3/4" MNPT (19 mm)
Impeller Glass-filled polyphenylene sulfide w/ carbon bushing
Electrical 115 V, 50/60 Hz, 11.6/9.4 A
230 V, 50/60 Hz, 5.8/4.7 A

Performance

Performance

115 or 230 V, 60 Hz

Head GPM (LPM)
5' 38 (143.8)
10' 36.7 (138.9)
20' 31.7 (120)
30' 28.3 (107.1)
40' 21.7 (82.1)

Order Information


TE-6-MD-HC Series Chemical Transfer Pump

Item Model Volts Max Flow Rate - 60 Hz Shut-Off Flow Rate At 1ft
586604 TE-6-MD-HC 115 VAC / 230 VAC 38 gpm / 2280 gph / 8631 Lph / 143.85 Lpm / 8.63 m³/h 51 ft / 15.54 m 38 gpm / 2280 gph / 8631 Lph / 143.85 Lpm / 8.63 m³/h