Highly Corrosive Chemical Transfer Pumps

TE-4-MD-HC Series Magnetic Drive Pump

Highly Corrosive Chemical Transfer Pumps

TE-4-MD-HC Series Magnetic Drive Pump

When it comes to choosing a chemical transfer pump, it's all about compatibility with the fluids you will be pumping. From highly corrosive acids solutions and solvents to sterile solutions and other abrasives, the TE-4-MD-HC is ideal for heavy use and is a steady performer in the effortless transfer of highly corrosive fluids.

Features & Benefits

  • 1/10 hp open TEFC PSC motor
  • Glass-filled polyphenylene sulfide magnet housing and volute
  • 1.1 specific gravity
  • Fluoroelastomer (FKM) O-ring
  • Ceramic thrust washers and shaft
  • Run dry capability up to 8 hours

Overview


The TE-4-MD-HC Series features leakproof, seal-less magnetic drives and is designed for in-line, non-submersed use. Built to outlast high corrosives and temperatures, the TE-4-MD-HC is equipped with an open, totally enclosed fan-cooled split capacitor motor with sleeve bearings and chemical-resistant components. It also has a run-dry capability of up to 8 hours.

Specifications


Capacity 14.2 gpm @ 1'
Shut Off 24.3' (7.4 m)
Max. Liquid Temp. 200 °F (93.3 °C)
Discharge 1/2" MNPT (12.7 mm)
Impeller Glass-filled polyphenylene sulfide w/ carbon bushing
Electrical 115 V, 50/60 Hz, 1.7 A
230 V, 50/60 Hz, 0.5/0.7 A

Performance

Performance

115 or 230 V, 60 Hz

Head GPM (LPM)
1' 14.2 (53.8)
3' 13.5 (51.1)
6' 12.8 (48.5)
9' 11.8 (44.7)
15' 9.2 (34.8)

Order Information


TE-4-MD-HC Series Chemical Transfer Pump

Item Model Volts Maximum Flow Rate - 60Hz Shut-Off Flow Rate At 1ft
582604 TE-4 115 VAC 14 gpm / 840 gph 24.3 ft 14 gpm / 840 gph
582614 TE-4-MD-HC 230 VAC 14 gpm / 840 gph 24.3 ft 14 gpm / 840 gph