3-MD-MT-HC Series Magnetic Drive Pump
3-MD-MT-HC Series Magnetic Drive Pump
The 3-MD-MT-HC chemical transfer pump handles highly corrosive chemicals at elevated temperatures based on the unique materials used in its construction. The plastic parts on these pumps contain glass-filled PPS and hold up exceptionally well against harsh chemicals and abrasives. The spindle shaft is stationary, and the captive thrust washers (front and rear) are composed of alumina ceramic, a highly chemical resistant material.
Features & Benefits
- 1/25 hp open FC motor
- Glass-filled polyphenylene sulfide magnet housing and volute
- 1.1 specific gravity
- Fluoroelastomer (FKM) O-ring
- Ceramic thrust washers and shaft
Overview
3-MD-MT-HC models utilize a carbon bushing between the impeller and spindle to allow the pumps to run dry (without fluid) for up to eight hours at a time. Each model is equipped with a 1/2" MNPT discharge and 1/2" MNPT intake. The pump has a flow rate of 8.3 gallons per minute at 1' of head and a shut-off PSI of 7.0.
Specifications
| Capacity | 8.5 gpm @ 1' |
| Shut Off | 16.2' (4.9 m) |
| Max. Liquid Temp. | 200 °F (93.3 °C) |
| Discharge | 1/2" MNPT (12.7 mm) |
| Impeller | Glass-filled polyphenylene sulfide w/ carbon bushing |
| Electrical | 115 V, 50/60 Hz, 1.3 A |
Performance
| Head | GPM (LPM) |
| 1' | 8.5 (32.2) |
| 3' | 7.6 (28.8) |
| 6' | 7.1 (26.9) |
| 9' | 5.9 (22.3) |
| 15' | 1.7 (6.4) |
Order Information
3-MD-MT-HC Series Chemical Transfer Pump
| Item | Model | Volts | Maximum Flow Rate - 60Hz | Shut-Off | Flow Rate At 1ft |
|---|---|---|---|---|---|
| 578603 | 3-MD-MT-HC | 115 VAC | 8.5 gpm / 510 gph | 16.2 ft | 8.3 gpm / 498 gph |
Support Materials
Featured Downloads
Brochures
| Title | Type | Size | |
|---|---|---|---|
 |
Mag Drive Selection Tool | 3.28 MB |
Catalogs
| Title | Type | Size | |
|---|---|---|---|
 |
Industrial Product Catalog | 12.23 MB |
Manuals
| Title | Type | Size | |
|---|---|---|---|
 |
Chemical Resistance Chart | 0.96 MB |
