Mildly Corrosive Chemical Transfer Pumps

5-MD Series Magnetic Drive Pump

Mildly Corrosive Chemical Transfer Pumps

5-MD Series Magnetic Drive Pump

The compact 5-MD Series non-submersible pump delivers continuous duty pumping of mildly corrosive acids, alkalis, solvents, brine, plating solutions, sterile solutions, and other mildly corrosive chemicals and solutions. This pump is constructed of high-quality materials to withstand fluid temperatures up to 150 °F (66 °C), these materials are also suitable for ambient air temperatures to 77 °F (25 °C). 

Features & Benefits

  • 1/8 hp open FC PSC motor
  • Glass-filled polypropylene magnet housing
  • Glass-filled polypropylene volute
  • 1.1 specific gravity
  • Nitrile O-ring
  • Titanium thrust washers and shaft


Capable of reaching 15.1 gallons per minute at 1' head, the 5-MD Series has a maximum PSI of 15. The volute, magnet housing, and impeller are glass-filled polypropylene for excellent chemical resistance. Ceramic shaft and thrust washers are 99.5% pure alumina for excellent wear resistance and trouble-free service. Pumping heads are easily rotated, cleaned, or serviced with no special tools required. The spindle shaft is supported at both ends to prevent impeller damage during the start and stop of the pump.


Capacity 905 gph @ 1'
Shut Off 34.6' (10.5 m)
Max. Liquid Temp. 150 °F (66 °C)
Discharge 1/2" MNPT (12.7 mm)
Impeller Glass-filled polypropylene & Ceramagnet "A" (Barium Ferrite)
Electrical 115 V, 60 Hz, 2.1 A
230 V, 50/60 Hz, 1.0/1.1 A



115 or 230 V, 60 Hz

Head GPH (LPH)
1' 905 (3425.8)
3' 875 (3312.2)
6' 800 (3028.3)
9' 750 (2839.1)
15' 635 (2403.7)

Order Information

5-MD Series Chemical Transfer Pump

Item Model Volts Maximum Flow Rate - 60Hz Shut-Off Flow Rate At 1ft
583002 5-MD 115 VAC 15.1 gpm / 906 gph 34.6 ft 15.1 gpm / 906 gph

Support Materials


Title Type Size
Mag Drive Selection Tool PDF 3.28 MB


Title Type Size
Industrial Product Catalog PDF 12.23 MB


Title Type Size
Chemical Resistance Chart PDF 0.96 MB