511064 - 10S-SMPXRT-K

1/2 HP Simplex package for the collection of sewage, effluent, drainage or seepage water.

Item: 511064
Model: 10S-SMPXRT-K

Electrical

HP 1/2 hp
Frequency 60 Hz
Phase Single-Phase
Amps - Full Load 11 A
Amps - Starting 28 A
Full Load Watts 1230 W
Volts 115 VAC
Cord Length 6.1 m / 20 ft
Pump Power Cord Type SJTW
Pump Power Cord Gauge 16-3
Lead Length 6.1 m / 20 ft
Motor Type Submersible
Continuous Duty Yes
Thermal Overload Protection Yes

Operation

Max Flow Rate - 60 Hz 454.25 Lpm / 27255 Lph / 27.25 m³/h
Shut-Off 7.62 m / 25 ft
Shut Off Height - 60Hz 10.97 m / 36 ft
Max Solid Handling Size 5.08 cm / 2 "
Switch Type Piggyback Mechanical Float
Motor Cooling Oil
Max Fluid Temperature 135°F

Materials of Construction

Pump Base Material Cast Iron
Pump Body Material Cast Iron
Pump Volute Material Cast Iron
Impeller Type Vortex
Impeller Material Nylon
Motor Shaft End - Material 420 Stainless Steel
Fasteners Material Stainless Steel
Top Bearing Material Steel
Top Bearing Type Ball
Seal Material Carbon/Ceramic, Nitrile
Seal Type Carbon/Ceramic/Nitrile

Installation

Discharge Thread FNPT
Discharge Type Threaded - FNPT
Discharge 2 "
Product Weight 26.31 kg / 58 lb
Product Width 55.88 cm / 22 "
Product Height 76.2 cm / 30 "
Product Length 55.88 cm / 22 "
Pump Length 26.42 cm / 10.4 "
Product Weight w/ Pack 26.31 kg / 58 lb
Carton Width 57.15 cm / 22.5 "
Carton Height 99.06 cm / 39 "
Carton Length 57.15 cm / 22.5 "
Off Level - Range 2" - 6"
On Level - Range 9" - 14"

Other

Accessories Included Pre-Assembled: 18"x30" Roll Top Polyethylene Basin with 4" Adaptaflex and Multi-tite Grommet (Item 113056), 1-Piece Structural Foam Slip-Fit Cover with 2" discharge and 2 or 3" vent, with 10SC-CIM Sewage Pump (Item 511433) 115V 4/10HP, piggyback mechanical float switch and 2" check valve (Item 940022).
Component Pump Part Number 511433
Standard Warranty 36 Months
  Warranty Terms and Conditions Link