Parts Washer Pump

1-YS Series

Parts Washer Pump

1-YS Series

This pump is for use with Stoddard solvent and deodorized kerosene submerged parts washer applications only. These refined petroleum distillates are free from the tendency to heat spontaneously and have a closed cup flash point no lower than 100 °F (37.8 °C).

Features & Benefits

  • 1/150 horsepower motor
  • Cast aluminum housing
  • Nylon volute
  • Fluoroelastomer (FKM) shaft seal
  • 1/2" (12.7 mm) conduit fitting

Overview


The 1-YS is a 1/150 horsepower cast aluminum, submersible oil-filled parts washer pump. It has a double-lip Viton seal and nylon volute with 1/4" MNPT discharge. The pump has a maximum flow rate of 205 gph @ 1'. Its equipped with a 6' power cord without a plug has a "Master Builders" conduit fitting at pump housing for mounting.

Specifications


Capacity 205 gph @ 1'
Shut Off 7.4' (2.3 m)
Max. Liquid Temp. 120 °F (49 °C)
Discharge 1/4" (6 mm) NPT
Impeller Nylon
Electrical 115 V, 60 Hz, 1.1 A
230 V, 50/60 Hz, 0.6 A

Performance

Performance
Head GPH (LPH)
1' 205 (776)
3' 168 (635.9)
5' 120 (454.2)

Order Information


1-YS Series Parts Washer Pumps

Item Model Volts Max Flow Rate - 60 Hz Shut-Off Flow Rate At 1ft Cord Length
501036 1-YS 230 VAC 3.42 gpm / 205 gph / 776 Lph / 12.93 Lpm / 0.78 m³/h 7.4 ft / 2.26 m 3.42 gpm / 205 gph / 776 Lph / 12.93 Lpm / 0.78 m³/h 6 ft / 1.83 m
501020 1-YS 115 VAC 3.42 gpm / 205 gph / 776 Lph / 12.93 Lpm / 0.78 m³/h 7.4 ft / 2.26 m 3.42 gpm / 205 gph / 776 Lph / 12.93 Lpm / 0.78 m³/h 6 ft / 1.83 m