620220 - WS50HM-12-20

This 1/2 hp pump is ideal for dewatering, water transfer, effluent and wastewater removal. Designed for hi-torque with automatic reset, this pump includes a cast iron motor and pump housing, solids-handling non-clog impeller, stainless steel heat treated shaft and 130 GPM.

Item: 620220
Model: WS50HM-12-20

Electrical

HP 1/2 hp
Frequency 60 Hz
Phase Single-Phase
Amps - Full Load 9.7 A
Amps - Starting 32.6 A
Full Load Watts 1540 W
Volts 208 VAC
Cord Length 6.1 m / 20 ft
Pump Power Cord Type SJOW
Pump Power Cord Gauge 16-3
Lead Length 6.1 m / 20 ft
Motor Type Submersible
Continuous Duty Yes
Thermal Overload Protection Yes

Operation

Max Flow Rate - 60 Hz 435.32 Lpm / 26119 Lph / 26.12 m³/h
Shut-Off 19.2 m / 63 ft
Shut Off Height - 60Hz 19.2 m / 63 ft
Max Solid Handling Size 1.91 cm / 0.75 "
Switch Type Manual
Motor Cooling Oil
Max Fluid Temperature 120°F

Materials of Construction

Pump Base Material Cast Iron
Pump Body Material Cast Iron
Pump Volute Material Cast Iron
Impeller Type Non-Clog
Impeller Material Cast Iron
Motor Shaft End - Material Stainless Steel
Intake Screen Material Cast Iron Epoxi
Fasteners Material Stainless Steel
Top Bearing Material Steel
Top Bearing Type Ball
Bottom Bearing Material Steel
Bottom Bearing Type Ball Bearing
Seal Material Carbon/Ceramic, Nitrile
Seal Type Carbon/Ceramic/Nitrile

Installation

Discharge Thread FNPT
Discharge Type Threaded - FNPT
Discharge 2 "
Product Weight 25.4 kg / 56 lb
Product Width 23.83 cm / 9.38 "
Product Height 34.93 cm / 13.75 "
Product Length 31.12 cm / 12.25 "
Pump Length 31.12 cm / 12.25 "
Product Weight w/ Pack 28.58 kg / 63 lb
Carton Width 25.4 cm / 10 "
Carton Height 50.8 cm / 20 "
Carton Length 31.75 cm / 12.5 "
Off Level - Range Not Applicable
On Level - Range Not Applicable

Other

Accessories Included None
Electrical Agency Approvals CSA
Standard Warranty 36 Months
  Warranty Terms and Conditions Link