620200 – WS50HM
1/2 HP Manual Effluent Pump with 115 Volt and 30' Cord. Designed for high torque with automatic reset, this pump handles solids up to 3/4" and has a 2" NPT (51 mm) discharge.
| Item: | 620200 |
| Model: | WS50HM |
Ratings |
|
| HP | 1/2 hp |
| Frequency | 60 Hz |
| Phase | Single-Phase |
| Amps - Full Load | 15 A |
| Amps - Starting | 26.9 A |
| Full Load Watts | 1100 W |
| Volts | 115 VAC |
| Cord Length | 30 ft |
| Pump Power Cord Type | SJOW |
| Pump Power Cord Gauge | 14-3 |
| Lead Length | 30 ft |
| Motor Type | Submersible |
| Continuous Duty | Yes |
| Thermal Overload Protection | Yes |
| Maximum Flow Rate - 60Hz | 115 gpm / 6900 gph |
| Shut-Off | 63 ft |
| Shut Off Height - 60Hz | 63 ft |
| Max Solid Handling Size | 0.75 " |
| Switch Type | Manual |
| Motor Cooling | Oil |
Liquid |
|
| Max Fluid Temperature | 120 °F |
Materials of Construction |
|
| Pump Base Material | Cast Iron |
| Pump Body Material | Cast Iron |
| Pump Volute Material | Cast Iron |
| Impeller Type | Non-Clog |
| Impeller Material | Cast Iron |
| Motor Shaft End - Material | Stainless Steel |
| Intake Screen Material | Cast Iron Epoxi |
| Fasteners Material | Stainless Steel |
| Top Bearing Material | Steel |
| Top Bearing Type | Ball |
| Bottom Bearing Material | Steel |
| Bottom Bearing Type | Ball Bearing |
| Seal Material | Carbon/Ceramic, Nitrile |
| Seal Type | Carbon/Ceramic/Nitrile |
Installation |
|
| Discharge Thread | FNPT |
| Discharge Type | Threaded - FNPT |
| Discharge | 2 " |
| Product Length | 12.25 " |
| Product Width | 9.38 " |
| Product Height | 13.75 " |
| Pump Length | 12.25 " |
| Product Weight | 57 lb |
| Product Weight w/ Pack | 62 lb |
| Carton Length | 10 " |
| Carton Width | 12 " |
| Carton Height | 19.75 " |
Other |
|
| Accessories Included | None |
| Electrical Agency Approvals | CSA |
| Standard Warranty | 36 Months |
| Warranty Terms and Conditions Link | |
