514520 - 16EH-CIM

The 16EH-CIM Submersible High Head Effluent pump is designed to handle 3/4" solids. Shut-off at 50', heavy-duty cast iron housing, volute and vortex impeller, thermal overload protection and 2" FNPT discharge. Recommended for use in basins or lift stations and suitable for pumping sewage, effluent, wastewater and other non-explosive, non-corrosive liquids

Item: 514520
Model: 16EH-CIM

Electrical

HP 1 hp
Frequency 60 Hz
Phase Single-Phase
Amps - Full Load 10.2 A
Amps - Starting 30 A
Full Load Watts 2200 W
Volts 230 VAC
Cord Length 6.1 m / 20 ft
Pump Power Cord Type STW
Pump Power Cord Gauge 16-3
Lead Length 6.1 m / 20 ft
Motor Type Submersible
Continuous Duty Yes
Thermal Overload Protection Yes

Operation

Max Flow Rate - 60 Hz 340.69 Lpm / 20441 Lph / 20.44 m³/h
Shut-Off 24.69 m / 81 ft
Shut Off Height - 60Hz 24.69 m / 81 ft
Max Solid Handling Size 1.91 cm / 0.75 "
Switch Type Manual
Motor Cooling Oil
Max Fluid Temperature 140°F

Materials of Construction

Pump Base Material Cast Iron
Pump Body Material Cast Iron
Pump Volute Material Cast Iron
Impeller Type Non-Clog
Impeller Material Cast Iron
Motor Shaft End - Material Stainless Steel
Intake Screen Material Cast Iron Epoxi
Fasteners Material Stainless Steel
Top Bearing Material Steel
Top Bearing Type Ball
Bottom Bearing Material Steel
Bottom Bearing Type Ball Bearing
Seal Material Carbon/Ceramic, Nitrile
Seal Type Carbon/Ceramic/Nitrile

Installation

Discharge Thread FNPT
Discharge Type Threaded - FNPT
Discharge 2 "
Product Weight 40.37 kg / 89 lb
Product Width 25.15 cm / 9.9 "
Product Height 41.15 cm / 16.2 "
Product Length 35.81 cm / 14.1 "
Pump Length 35.74 cm / 14.07 "
Product Weight w/ Pack 40.37 kg / 89 lb
Carton Width 25.72 cm / 10.13 "
Carton Height 53.34 cm / 21 "
Carton Length 36.83 cm / 14.5 "
Off Level - Range Not Applicable
On Level - Range Not Applicable

Other

Accessories Included None
Electrical Agency Approvals CSA
Standard Warranty 36 Months
  Warranty Terms and Conditions Link