509533 9ECH-CIM

Built to handle higher-head flow in residential wastewater removal, dewatering and water transfer applications, the 9ECH Series is a homeowner's trusted companion. Constructed of heavy cast iron with an epoxy coated finish and stainless steel fasteners, the 9ECH Series will provide years of reliability.

Item: 509533
Model: 9ECH-CIM

Ratings

HP 0.4 hp
Frequency 60 Hz
Phase Single-Phase
Amps - Full Load 7 A
Amps - Starting 14.5 A
Full Load Watts 830 W
Volts 115 VAC
Cord Length 30 ft
Pump Power Cord Type SJTW
Pump Power Cord Gauge 18-3
Lead Length 30 ft
Motor Type Submersible
Continuous Duty Yes
Thermal Overload Protection Yes
Maximum Flow Rate - 60Hz 70 gpm / 4200 gph
Minimum Flow Rate - 60Hz 5 gpm / 300 gph
Shut-Off 45 ft
Minimum Head - 60Hz 5 ft
Shut Off Height - 60Hz 45 ft
Stages 1
Max Solid Handling Size 0.75 "
Switch Type Manual
Motor Cooling Oil

Liquid

Max Fluid Temperature 140 °F

Materials of Construction

Pump Base Material Cast Iron
Pump Body Material Cast Iron
Pump Volute Material Cast Iron
Impeller Type Non-Clog
Impeller Material Thermoplastic Elastomer
Motor Shaft End - Material SAE 1040/45 Carbon Steel
Check Valve No
Intake Screen Material Cast Iron Epoxi
Fasteners Material Stainless Steel
Top Bearing Material Steel
Top Bearing Type Ball
Bottom Bearing Material Steel
Bottom Bearing Type Ball Bearing
Seal Material Carbon/Ceramic, Nitrile
Seal Type Carbon/Ceramic/Nitrile

Installation

Discharge Thread FNPT
Discharge Type Threaded - FNPT
Discharge 1.5 "
Product Length 8.9 "
Product Width 8.4 "
Product Height 10.9 "
Pump Length 8.9 "
Product Weight 38 lb
Product Weight w/ Pack 37.4 lb
Carton Length 11.42 "
Carton Width 9.84 "
Carton Height 13.78 "

Other

Accessories Included None
Electrical Agency Approvals CSA
Standard Warranty 12 Months
  Warranty Terms and Conditions Link