snowy home (hero).png

Leaving Home for the Holidays? Check These Water Systems Before You Go

11/19/2026 | Residential

Holiday travel often means leaving your home unattended for days at a time, just as colder temperatures and winter weather begin creating new challenges. Freezing temperatures can affect plumbing and outdoor water systems, while winter storms that bring extreme cold, snow, ice and high winds can also interrupt electrical power and heat. 

Before packing the car or heading to the airport, take a few minutes to check the equipment that moves, drains or manages water around your home. Sump pumps, condensate pumps, outdoor pumps and other water-handling equipment can be easy to overlook until something goes wrong.

1. Test and Prepare Your Sump Pump Before Leaving Home for the Holidays

Sump pump maintenance is important any time your home will be unattended. While sump pumps can sit idle for extended periods, changing weather can quickly increase the amount of water entering a sump pit. A seasonal inspection can help identify potential issues before the pump is needed. 

Have Your Sump Pump Tested 

If you’re going to be away from home for multiple weeks, you may want to have your sump pump inspected before leaving home. The contractor will test the primary sump pump according to the manufacturer's instructions, make sure the pump starts and stops properly as the water level changes (for automatic systems) and listen for unusual sounds or vibration that could indicate the system needs further attention. 

The rest of the sump system should also be inspected: 

  • The sump pit: Debris and other materials that could interfere with pump operation should be removed.
  • The float or level-sensing device: The float or level-sensing device should move freely and not obstructed. 
  • The discharge line: If there are damages, obstructions or conditions that could prevent water from leaving the system in the discharge line, your sump pump could get backed up while you’re away.
  • Operation: Unusual sounds or operation could indicate an issue. The pumped water should have a clear path out of the sump system and away from the home and according to the system's installation requirements. 
SPBS Full System Product Photo 16-9.png

Test Your Backup Sump Pump 

If your sump system includes a backup pump, it is important to test it as well. This becomes particularly vital during winter because severe weather can cause electrical outages. Before leaving, identify equipment that relies on electricity and plan for alternative power sources where appropriate.

Verify that the backup system operates according to its manufacturer's instructions and, if the system uses a battery backup, inspect it according to the manufacturer's recommended maintenance schedule. You don't want to discover there is an issue with the backup system only after the primary pump loses power.

Prevent Your Sump Pump Discharge Line from Freezing 

Discharge lines are particularly vulnerable to cold weather—water expands as it freezes, potentially damaging pump housings, piping, valves and fittings when water is trapped inside equipment. 

As frozen discharge lines can become clogged, they can cause the sump pump to work harder than normal, potentially burning out the motor and causing faster wear on the pump. Additionally, clogs can cause the backed-up water to overflow and flood the basement and cause pressure that can rupture pipes or joints. A frozen discharge line can also cause water to pool around the foundation and cause compromises. 

Spending additional time to ensure the sump pump discharge line does not freeze and that it can properly carry collected water away from the sump system even in extreme cold could save you trouble after you return home. 

To keep sump pump discharge lines from freezing: 

  • Inspect accessible outdoor sections of the discharge system.
  • Look for snow, ice, debris or other potential obstructions around the discharge point.
  • Check for areas where water may remain trapped and be exposed to freezing conditions.
  • Make sure the discharge point remains unobstructed.
  • Insulate the sump pump pipes either with heat tape or foam pipe insulation, paying special attention to sections that are exposed or outdoors. If you’re unfamiliar with plumbing, it is best to have a professional insulate the pipes.
  • Consider installing a freeze guard, which allows water to escape if the pipe is freezing.
  • Follow all manufacturer instructions for your specific sump and discharge system. 

Avoid improvised modifications to the discharge system simply to address freezing concerns. If you're unsure whether your system is properly configured for cold weather, work with a qualified professional.

Cracked pipe ice 16-9.png

2. Protect Your Plumbing from Frozen Pipes While You're Away

Before leaving for the holidays, take steps to keep other water-carrying pipes from freezing.

Pay particular attention to plumbing in areas more vulnerable to freezing, such as garages, crawl spaces, basements and other unheated or poorly insulated spaces. 

During extreme cold, set your thermostat to at least 55°F (13°C), even when you’re away.

Open cabinet doors beneath sinks to let warm air circulate around plumbing, and allow vulnerable faucets to drip slowly to keep water moving through the pipes.

3. Check Your Furnace Condensate Pump Before Leaving Home

Cold weather typically means your home's heating equipment is working more frequently. If you have HVAC equipment that produces condensate and relies on a condensate pump, add that pump to your pre-travel checklist. Condensate pumps help manage the moisture produced by HVAC systems, and debris, algae or mineral deposits can build up in the pump or discharge line over time and restrict water flow.

Before leaving your home for an extended period, examine the condensate pump by:

Condensate pump 16-9.png
  • Checking the power supply: Make sure the condensate pump is properly connected to a reliable power source
  • Inspecting the pump’s reservoir: Check for cracks and that it is not overflowing.
  • Examining the float switch: Look for debris or obstructions that could prevent it from moving and operating correctly.
  • Checking and cleaning the pump as directed by the manufacturer: Look for debris or buildup in the reservoir and discharge system, ensuring there are not cracks or an overflow of water.
  • Reviewing the discharge tubing: Look for kinks or obstructions and that condensate has a clear path away from the pump.
  • Testing operation: Follow the instructions for your specific pump to confirm that it activates and discharges water properly. 

4. Winterize Outdoor Water Features Before Traveling

Water_Fountain_Winterization_Blog_Post_16-9.png

Many homeowners in locations within the U.S. and Canada will have already winterized outdoor water features before the holidays. However, if you live in an area where the weather has not required winterizing ponds, fountains or pools, check that there will not be any hard freezes while you are gone.

A short list of how to winterize outdoor pumps includes:  

  • Draining water from equipment and plumbing that shouldn't contain water during freezing conditions.
  • Removing equipment that isn't intended to remain outdoors during winter.
  • Cleaning pumps before seasonal storage.
  • Checking exposed piping and fittings.
  • Following the manufacturer's winterization and storage instructions for each product.

Additionally, when possible, ensure exterior water supply valves are shut off. Disconnect garden hoses and drain outdoor faucets to help prevent trapped water from freezing.

Don't wait until the night before a trip if freezing temperatures are already in the forecast. Winterization should be completed before freezing temperatures become consistent, particularly for equipment installed above the frost line. 

To learn how to winterize individual outdoor water features, follow our guides: 

5. Be Prepared for Water Removal After a Leak Upon Your Return

Even with preventative maintenance, water leaks can happen. Being prepared before leaving your home for the holidays can help you make quick decisions if there is unexpected water upon returning home. Know where your home’s main water shutoff is located before an emergency happens so you can act quickly. 

In case of emergency, prepare your utility pump before a leak happens so it can be utilized immediately, including ensuring its hoses and accessories are together and accessible and that it works.

El Ninos flooding submersible utility pumps.png

Depending on the pump and application, a utility pump can help with water removal or transfer involving: 

  • Basement water
  • Crawl-space water
  • Water following plumbing leaks
  • Water associated with snowmelt
  • Other unwanted standing water

The type of utility pump needed depends on the application. A submersible utility pump can be placed directly in water for applications such as removing accumulated water. Non-submersible pumps can be useful when water needs to be transferred from one location to another. 

Prepare Your Home Before Traveling for Fewer Water Problems Later

A few checks before leaving for the holidays can help reduce the chance of coming home to a water problem. Make sure pumps, discharge lines, plumbing and other water-handling systems are ready for cold weather so they can continue doing their jobs while you're away. 

Checklist for Before Leaving Your Home for the Holidays 

  • Test the primary sump pump.
  • Test the backup sump system.
  • Inspect the sump discharge line.
  • Check plumbing vulnerable to freezing.
  • Inspect the furnace condensate pump.
  • Winterize fountains, ponds, and outdoor pumps as appropriate.
  • Know where your main water shutoff is.
  • Make sure your utility pump and accessories are accessible.
  • Have someone check the house during an extended absence. 
< All News
Our Brand Promise

There’s a reason we’ve been the go-to pump for HVAC, Plumbing, Pool, and Hydroponics professionals for generations: experience. For 80 years, Little Giant® products have stood the test of time, pumping a steady flow of proven reliability in the most demanding applications.